top of page

MORSØ - EHXL

Miter Machine 

Fully automatic, electric/hydraulic 

Dust free operation - No compressor needed

➜ Dust free operation

➜ No compressor needed

➜ Exact 45° degree cut
➜ Noise level below 70dB

Perfect corner sample_edited.jpg
Perfect frame.jpg

AVAILABLE MODELS: MORSØ EH, MORSØ EHT, MORSØ EH DIGITAL, MORSØ EHN, MORSØ EHXL, MORSØ EFG

A fully automatic, electric/hydraulic miter machine with a dual hand release.

This makes the machine completely safe, as it is impossible to operate the machine and touch the knives at the same time.

Miter Machine - EHXL cuts all kinds of materials, including wood, plastic, MDF, and plywood.

Achieve a clean, smooth cut by automatically cutting the workpiece in at least two cuts. The cutting time varies from 1 second and up, depending on the thickness of the workpiece. After finishing the cut, the knife block automatically returns to the starting position.

The starting position (horizontal movement) is adjustable up to 125 mm/5” (maximum width of the workpiece is 150 mm/6”). For workpieces over 125 mm, the MORSØ-EHXL will automatically cut the workpiece bit by bit. The adjustment is made using a handle on the front of the MORSØ-EHXL.

The vertical movement of the knife block is also adjustable with three different heights, depending on the thickness of the workpiece (small, medium, or large).

These adjustments allow the MORSØ-EHXL to give you a clean and consistently accurate cut.

MORSØ-EHXL is CE approved.

For more information about this product or to place an order, please contact us HERE

  • Watch Demovideo
END PRODUCT
Perfect corner sample
Perfect frame
Hexagonal frame
Corner sample
bottom of page